Exhaust Systems
Benefits of an Aftermarket Exhaust


ADDED PERFORMANCE

With the proper exhaust you can enjoy gains whether in
throttle response, top end speed or a unique combination of both.

ENHANCED SOUND

Enjoy the aggressive rumble of your engine
while maintaining local sound requirements.

UNIQUE STYLE

Based on your preference, multiple
configurations and finishes available to accent any boat.


Exhaust Types

Diverters  
Diverters
"A diverter is a controlled device that changes the flow of fluids, gases and solid materials."

The most cost effective exhaust option is a full time thru-hull system. This system allows the exhaust to exit full time but does not offer control over the exhaust flow or sound.

 

CORSA Performance Marine offers two different diverter options: Captains Call Plus and the Captains Call.

 
Thur Hull  
Thru Hull
"An uncontrolled device that routes the flow of fluids, gases and solid materials."

The most popular exhaust option is a diverter. This controlled device allows for a bolder sound that is suited for the open water. This can be achieved with a thru-hull or the operator can switch to a thru-prop for quiet entry to marinas and boat docks.

 

CORSA Performance Marine offers two different thru-hull options: Quick & Quiet II and the Quick & Quiet

 


Exhaust Systems


Captains Call Plus
"The ultimate exhaust option available today."

When properly configured, the Captains Call Plus can meet most noise laws within the 50 states on any Stock 502 EFI or smaller production motor. This system incorporates a diverter that allows the captain to change from an aggressive thru-hull mode to a quieter thru-prop mode with a simple helm mounted on/off switch.

This control allows for a bolder sound that is suited for the open water, or the operator can switch to a thru-prop for quiet entry to marinas and boat docks. When exiting through the transom, the exhaust passes through silencer tips that reduce the sound levels to an acceptable level. As RPMs increase, more exhaust is forced through the Y-pipe, allowing optimum flow and noise reduction. This system tames some of the loudest motors without sacrificing any performance.

Available Exhaust Configurations



Offset
 
Side exit
 
Straight back
 
Transverse

All diverter kits include: diverters, electronics, tips, hose, and clamps.

Installation time is approximately four to six hours.

Available in high polished (mirror finish) stainless steel, and gloss black powder coat stainless steel finishes.



Captains Call
"Offers control and versatility"

This exhaust diverter allows the captain to change from an aggressive thru-hull mode to a quieter thru-prop mode with a simple helm mounted on/off switch. This control allows for a bolder sound that is suited for the open water. The operator can also switch to a thru-prop for quiet entry into marinas and boat docks. Even with an exhaust diverter installed in your boat, you may exceed the allowable noise level. If you boat in areas with noises restrictions, contact a CORSA Performance Marine representative about the Captains Call Plus system.

Available Exhaust Configurations



Offset
 
Side exit
 
Straight back
 
Transverse

All diverter kits include: diverters, electronics, tips, hose, and clamps.

Installation time is approximately four to six hours.

Available in high polished (mirror finish) stainless steel, and gloss black powder coat stainless steel finishes.



Quick & Quiet II
"A full time thru-hull system that maintains stock configuration"

When properly configured with mufflers, the Quick and Quiet II can meet most noise laws within the 50 states on any Stock 502 EFI or smaller production motor. Our system enables the exhaust to exit through the transom and the prop at the same time by combining a silencer tip with the housing of a diverter (no electronics). At lower RPMs most of the exhaust will be heard through the exhaust tips. As RPMs increase more exhaust is forced through the Y-pipe, allowing optimum flow and noise reduction.

Available Exhaust Configurations



Offset
 
Side exit
 
Straight back
 
Transverse

All kits include: splitters, tips, hose and clamps.

Installation time is approximately three to four hours.

Available in high polished (mirror finish) stainless steel, and gloss black powder coat stainless steel finishes.



Quick & Quiet
"The most cost effective option available"

When properly configured with mufflers, the Quick and Quiet can meet most noise laws within the 50 states on any Stock 502 EFI or smaller production motor.

Available Exhaust Configurations



Offset
 
Side exit
 
Straight back
 
Transverse

All kits include: pipe routing, tips, hose and clamps.

Installation time is approximately three to four hours.

Available in high polished (mirror finish) stainless steel, and gloss black powder coat stainless steel finishes.